Component Inspection

WARNING: This page is about a different variant/trim than selected.

Push the ignition lock switch in the direction of the arrow to make sure that continuity between terminals. (refer to the table below)

Standard Value:

Full stroke (A): 12.0 ± 0.3mm (0.4724 ± 0.0118 in.)

ON-OFF point (B): 2.0 mm (0.0787 in.)

Fig 1: Checking Continuity For Ignition Lock Switch With Connector End View

Courtesy of KIA MOTORS AMERICA, INC.

Information

Condition	Clutch Pedal Pressed	Clutch Pedal Released
Switch Operation	ON (below 1.0Ω)	OFF (Infinite Ω)