Repair Procedures: Inspection
WARNING: This page is about a different variant/trim than selected.
- Connect the KDSon the Data Link Connector (DLC).
- Measure the output voltage of the MAPS at idle and IG ON.
MANIFOLD ABSOLUTE PRESSURE SENSOR (MAPS) OUTPUT VOLTAGE
| Pressure [kPa (kgf/cm2
, psi)] |
Output Voltage (V) |
| 32.5 (0.33, 4.71) |
0.5 |
| 284 (2.90, 41.19) |
4.5 |