FixVault
Home › Kia › 2018 › Sedona EX › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control Module Diagnosis › DTC B1210: Front Left Sensor Fault › System Inspection › Visual Inspection

Visual Inspection

  1. Ignition "OFF"
  2. Refer to INSTALLATION FRONT LEFT PAS and check for proper installed condition of Front Left PAS Sensor.
  3. Remove any dirt or contamination on/and around Front Left PAS Sensor area.
  4. Check for correct type of sensor installation.
  5. Check for any damage or distortion of sensor and sensor bracket.
  6. Has any problem been found?

    YES 

    • Carefully re-do this troubleshooting guide steps.
    • If problem still occurs, replace Sensor and then go to "Verification Of VEHICLE REPAIR " procedure.

    NO 

About FixVault