FixVault
Home › Kia › 2018 › Sedona EX › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Yaw-Rate And G Sensor › Repair Procedures › G-Sensor Calibration

G-Sensor Calibration

  1. Turn ignition "OFF" and connect KDS.
  2. While ignition "ON" & engine "OFF", select vehicle name and ESC system.
  3. Perform the "G-Sensor Calibration" procedure with KDS.
    Fig 1: Screen Display - G-Sensor Calibration
    G12274084Courtesy of KIA MOTORS AMERICA, INC.
  4. Complete the "G-Sensor Calibration" procedure.
About FixVault