FixVault
Home › Kia › 2018 › Sedona EX › Repair and Diagnosis › External Pages › Different car › Section 146 (Audio System) › Audio Remote Control › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the resistance between terminals in each switch position (LH).
    Fig 1: Audio Remote Control Switch With Connector End View (LH)
    G12297250Courtesy of KIA MOTORS AMERICA, INC.

    [LH: Audio + Hands free + Voice] 

    Switch Connector terminal Resistance (±5%)
    SEEK Up 1-6 430 kΩ
    SEEK Down 1.11 kΩ
    MODE 2.11 kΩ
    MUTE 3.11 kΩ
    Volume (+) 4.61 kΩ
    Volume (-) 6.81 kΩ
    Voice 10.71 kΩ
    END 18.91 kΩ
    SEND 40.91 kΩ
  2. Check the resistance between terminals in each switch position (RH).
    Fig 2: Audio Remote Control Switch With Connector End View (RH)
    G12297251Courtesy of KIA MOTORS AMERICA, INC.

    [RH: Cruise + Trip] 

    Switch Connector terminal Resistance (±5%)
    Cancel 2-6 390 Ω
    SET - 610 Ω
    RES + 910 Ω
    Cruise ON/OFF 1.38 kΩ
    SCC (Following distance control) 3.63 kΩ
    Group 1-6 390 Ω
    Trip Up 610 Ω
    Trip Down 910 Ω
    ENTER 1.38 kΩ
About FixVault