Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Check the stop lamp switch.
1. Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
2. The stop lamp switch is in good condition if there is no continuity when plunger is pushed.

Fig 1: Check Stop Lamp Switch

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Stop Lamp Switch Connector Terminals

Courtesy of KIA MOTORS AMERICA, INC.