FixVault
Home › Kia › 2018 › Sedona L › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis (3 Of 3) › DTC P061B: Internal Control Module Torque Calculation Performance › DTC Information › DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Level 2 monitoring (=Process monitoring)
  1. Poor Connector Connection
  2. Faulty PCM
Enable Conditions
  • Engine speed during engine start is higher than 32 RPM
Threshold Value
  • When the difference between the calculated torque value and the actual torque value is over 50 to 350 Nm
Diagnostic Time
  • 480ms
MIL On Condition
  • 1 Drive Cycle
About FixVault