Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the Integrated Gateway & Power Control Module (IGMP).
(Refer to Fuses And Relays - "RELAY BOX (PASSENGER COMPARTMENT) ")
Disconnect the SVM unit connectors (A).

Fig 1: Locating SVM Unit Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Remove the SVM unit mounting clip (A).

Fig 2: Removing SVM Unit Mounting Clip
Courtesy of KIA MOTORS AMERICA, INC.
Remove the SVM unit (A) after loosening the mounting bolt and nut.

Fig 3: Removing SVM Unit Mounting Bolt And Nut

Courtesy of KIA MOTORS AMERICA, INC.