Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Fix the brake pedal arm and insert fully the brake switch so that the contact part is invisible.

Fig 1: Insert Brake Switch
Courtesy of KIA MOTORS AMERICA, INC.
After inserting, turn the brake switch 45° clockwise, and then assemble locking plate by pushing.

Fig 2: Turn Brake Switch 45° Clockwise
Courtesy of KIA MOTORS AMERICA, INC.
Confirm the gap between brake switch and bracket.
Brake clearance (A) :

1.0 ~ 2.0 mm (0.04 ~ 0.08 in.)

Fig 3: Check Gap Between Brake Switch & Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Connect the brake switch connector (A).

Fig 4: Locating Brake Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.