Signal Circuit Inspection
WARNING: This page is about a different car, the 2017 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the Inhibitor switch connector.
- Ignition KEY "ON" & Engine "OFF".
- Measure the voltages between each terminal and chassis ground in each range (P, R, N, D).
Signal Code Table
| P | P-R | R | R-N | N | N-D | D | |
|---|---|---|---|---|---|---|---|
| Signal "1" | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| Signal "2" | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| Signal "3" | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| Signal "4" | 0 | 0 | 0 | 0 | 0 | 12V | 12V |