FixVault
Home › Kia › 2018 › Sedona L › Repair and Diagnosis › External Pages › Different car › Section 95 (Electronic Stability Program (Esp) System) › ESP Control Module › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to Brake system - "BRAKE SYSTEM BLEEDING ")

  4. Conduct the Variant coding.
  5. Conduct the Auto Detected Sensor Calibration.
  6. Conduct the Longitudinal G Sensor Calibration.
About FixVault