FixVault
Home › Kia › 2018 › Sedona LX › Repair and Diagnosis › External Pages › Different car › Section 123 (Airbag Module And Clock Spring) › Knee Airbag (KAB) Module › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2018 Kia Cadenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable, and wait for at least three minutes before beginning to work.
  2. Install in the reverse order of removal.
  3. Reconnect the negative battery cable.
  4. After installing the knee airbag (KAB), confirm proper system operation.
    • Switch "ON" the ignition. The SRS indicator light should turn on for about six seconds and then off.
About FixVault