Variant Coding (In Case HECU Is Replaced With New One)

Ignition switch "OFF"
Connect GDS to Data Link Connector (DLC).
Ignition switch "ON"
Select "Vehicle S/W Management " on GDS.
Perform "Variant Coding" in "Vehicle S/W Management " with GDS.
*Before performing the variant coding function, ESP coding code is required from GSW site.

Fig 1: Screen Display - Vehicle S/W Management

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Screen Display - Variant Coding

Courtesy of KIA MOTORS AMERICA, INC.