FixVault
Home › Kia › 2018 › Sorento L › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Yaw-Rate And G Sensor › Repair Procedures › G-Sensor Calibration

G-Sensor Calibration

  1. Turn ignition "OFF", and connect GDS.
  2. Turn ignition "ON" & engine "OFF", and select vehicle name and EPB system.
  3. Perform G-sensor calibration.
  4. Perform the "G-Sensor Calibration" procedure with GDS.
    Fig 1: Scantool Display - G-Sensor Calibration
    G12172624Courtesy of KIA MOTORS AMERICA, INC.
  5. Complete the "G-Sensor Calibration" procedure.
About FixVault