Repair Procedures: Installation

WARNING:

• Do not reuse any used injector fixing clip.
• Install the component to the specified torques.
• Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
• Apply engine oil to the injector O-ring.
• Do not reuse any used injector O-ring.
• Do not reuse any used bolt.
• When inserting the injector, be careful not to damage the injector tip.

WARNING:

• When fastening the fuel delivery pipe mounting bolts, fully hand-tighten first, and then tighten in the proper sequence (2 → 3 → 1 → 4 in several cycles up to the specified torque.

Fig 1: Fuel Delivery Pipe Mounting Bolts Tightening Sequence

Courtesy of KIA MOTORS AMERICA, INC.

1. Install in the reverse order of removal.