FixVault
Home › Kia › 2018 › Sorento L › Repair and Diagnosis › External Pages › Different car › Section 11 (Automatic Transaxle Control System - 1.6L) › Input Speed Sensor › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" ignition.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the main connector (A).
    Fig 1: Disconnecting Main Connector
    G12227549Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure the resistance between power terminal (14) and signal terminal (8).

    Specification:  Approx. 0.88 MΩ

    Fig 2: Measuring Resistance Between Power Terminal (14) And Signal Terminal (8)
    G12227550Courtesy of KIA MOTORS AMERICA, INC.
About FixVault