ECM Neutral Mode Procedure (With Immobilizer)
WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed.
[If installing a used ECM]
- Perform "ECM Neutral Mode" procedure using KDS/KDS/GDS.
(Refer to NEUTRALIZING OF ECM )
- After finishing "ECM Neutral Mode", perform "Key Teaching" procedure using KDS/KDS/GDS.
(Refer to TEACHING PROCEDURES )
[If installing a new ECM]
Perform "Key Teaching" procedure using KDS/KDS/GDS.
(Refer to TEACHING PROCEDURES )