Repair Procedures: Installation

WARNING: This page is about a different car, the 2018 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Fix the brake pedal arm and insert fully the brake switch as hiding contact part.

Fig 1: Inserting Brake Switch
Courtesy of KIA MOTORS AMERICA, INC.
After inserting, turn the brake switch 45° clockwise, and then assemble locking plate by pushing.

Fig 2: Turning Brake Switch 45° Clockwise
Courtesy of KIA MOTORS AMERICA, INC.
Confirm the gap between brake switch and bracket.
Brake clearance (A) :

1.0 ~ 2.0 mm (0.04 ~ 0.08 in.)

Fig 3: Checking Gap Between Brake Switch And Bracket
Courtesy of KIA MOTORS AMERICA, INC.
Connect the brake switch connector (A).

Fig 4: Locating Brake Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.