DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Signal inspection - Signal stuck	Poor connection Upstream (S1) Blocking of intake system Fuel leakage in injector Improper fuel pressure
Enable Conditions	Exhaust gas temperature between 350°C (662°F) - 800°C (1472°F) Required Lambda = 1 Integrated exhaust gas mass after above condition greater than 35 g
Threshold Value	Secondary control variable by downstream O2 sensor greater than 0.07
Diagnostic Time	40s
MIL ON Condition	2 Driving cycle

* S1: upstream oxygen sensor/S2: downstream oxygen sensor