Repair Procedures: Installation

Install the parking brake cable (A).
Tightening torque :

19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)

Fig 1: Locating Parking Brake Cable (1 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Locating Parking Brake Cable (2 Of 2)
Courtesy of KIA MOTORS AMERICA, INC.
Install the parking brake cable (A), and then install the clip (B).

Fig 3: Locating Parking Brake Cable And Clip
Courtesy of KIA MOTORS AMERICA, INC.
Install the parking brake cable (B).

Fig 4: Locating Parking Brake Cable
Courtesy of KIA MOTORS AMERICA, INC.
Install the parking brake cable adjuster, then adjust the parking brake lever stroke by turning adjusting nut (A).
Parking brake lever stroke:

5 ~ 7 clicks (Pull the lever with 196 N.m (20 kgf, 44 lbf))

Fig 5: Adjusting Parking Brake Lever Stroke
Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Locating Adjusting Nut
Courtesy of KIA MOTORS AMERICA, INC.
Release the parking brake lever fully, and check that parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
Make sure that the parking brakes are fully applied when the parking brake lever is pulled up fully.
Install the rear console cover (A).

Fig 7: Locating Rear Console Cover
Courtesy of KIA MOTORS AMERICA, INC.
Install the rear tire and wheel.
Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)