FixVault
Home › Kia › 2018 › Stinger Base, AWD › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Button Engine Start System › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad passenger side panel.

    (Refer to Body - " CRASH PAD CENTER PANEL  ") 

  3. Remove the start/stop button (A) after loosening the mounting screws.
G12793048Courtesy of KIA MOTORS AMERICA, INC.
About FixVault