FixVault
Home › Kia › 2018 › Stinger Base, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Heated Oxygen Sensor (H02S) › Repair Procedures › Removal › [Bank 1/Sensor 2]

[Bank 1/Sensor 2]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the connector (A).
    G12792304Courtesy of KIA MOTORS AMERICA, INC.
  3. Lift the vehicle.
  4. Remove the catalytic converter bracket (A).
  5. Remove the sensor (B).
G12792305Courtesy of KIA MOTORS AMERICA, INC.
About FixVault