FixVault
Home › Kia › 2018 › Stinger GT2, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.3L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 2/Sensor 1]

[Bank 2/Sensor 1]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the connector (A).
    G12803512Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the sensor (B).
    G12803513Courtesy of KIA MOTORS AMERICA, INC.
About FixVault