FixVault
Home › Kia › 2019 › Forte FE, Standard Trans › Repair and Diagnosis › Transmission › Transmission Control Systems › Manual Transaxle Control System › Control Shaft Complete › Repair Procedures › Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • When installing, set control shaft lever to neutral position (A).
      G12830423Courtesy of KIA MOTORS AMERICA, INC.
    • Apply the sealant to the contact surface of transaxle and control shaft.

    Specified sealant:  Anaerobic adhesive for flange
    G12830424Courtesy of KIA MOTORS AMERICA, INC.
About FixVault