Repair Procedures: Inspection: Notes
WARNING: This page is about a different variant/trim than selected.
- Connect the KDS to the Data Link Connector (DLC).
- Turn the ignition switch ON.
- Check the KDS service data of the sensor.
- EV Mode (Engine clutch not operating)
Clutch Oil Pressure:
approx. 0 bar (0 kpa, 0 kgf/cm2
, 0 psi)
 Courtesy of KIA MOTORS AMERICA, INC.
|
- HEV Mode (Engine clutch operating)
Clutch Oil Pressure:
above 0 bar (0 kpa, 0 kgf/cm2
, 0 psi)
 Courtesy of KIA MOTORS AMERICA, INC.
|