Repair Procedures: Installation

WARNING: This page is about a different car, the 2018 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.

Place the RH and LH radar sensors on each side to get ready for installation.
Install the radar sensor to the bracket correctly (distinguish RH & LH) with mounting screws.
CAUTION:
- The shapes of the LH and RH blind spot detection units are different. Therefore, take notice when installing the blind spot detection units.
- Radar Sensors must be closed up against the bracket completely.
- After mounting radar sensors, check for looseness.
Install the rear bumper cover.
Connect the negative (-) battery terminal.