DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Compensation line open	Poor connector connection or damaged harness Open in HO2S control circuit Front HO2S
Enable Conditions	Fuel system status is Cut-off Sensor ceramic target temp is greater than 830°C (1526°F) EGT around upstream O2S(Model) is less than 750°C (1382°F) Internal resistance Signal is Valid
Threshold Value	Sensor voltage is greater than 4.37V Sensor voltage is less than 4.85V
Diagnostic Time	Immediately
MIL ON Condition	3 driving cycles