FixVault
Home › Kia › 2019 › Sedona EX › Repair and Diagnosis › External Pages › Different car › Section 32 (Engine Control System) › Variable Intake Solenoid (VIS) Valve › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition.
  2. Disconnect the VIS valve connector.
  3. Measure resistance between the VIS valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  30.0 - 35.0 Ω [20°C (68°F)]

About FixVault