Repair Procedures: Inspection
WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
- Switch "OFF" ignition.
- Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
- Disconnect the main connector (A).
- Measure the resistance between + terminal (19) and - terminal (26).
- Check that the resistance is within the specification.
| Item | Specification |
|---|---|
| Temp.[(°C)°F]/Resistance (kΩ) | (-40)-40/48.1 |
| (-20)-4.0/15.6 | |
| (0) 32.0/5.88 | |
| (20) 68.0/2.51 | |
| (40) 104.0/1.19 | |
| (60) 140.0/0.61 | |
| (80) 176.0/0.32 | |
| (100) 212.0/0.18 | |
| (120) 248.0/0.10 | |
| (140) 284.0/0.06 | |
| (150) 302.0/0.05 |