Repair Procedures: Inspection
WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch ON.
- Connect the GDS.
- Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
- The voltage will increase with higher light intensity and decrease with lower light intensity.
- Auto light signal
- Auto light ground
- Photo signal (RH)
- LED power (B+)
- LED ground (To BCM)
- Photo signal (LH)
- Photo power
- Auto light power (5V)