FixVault
Home › Kia › 2019 › Sedona L › Repair and Diagnosis › External Pages › Different car › Section 78 (Multi Function Camera Diagnosis) › DTC C1702-46: Variant Coding Error › Component Inspection › Variant coding procedure

Variant coding procedure

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "OFF"
  2. Connect KDS to Data Link Connector (DLC).
  3. Ignition "ON"
  4. Select "Vehicle S/W Management"  on KDS.
  5. Perform "LKAS/LDWS Variant Coding" in "Vehicle S/W Management"  with KDS.
    G13041641Courtesy of KIA MOTORS AMERICA, INC.
    G13041642Courtesy of KIA MOTORS AMERICA, INC.
    G13041643Courtesy of KIA MOTORS AMERICA, INC.
  6. Clear any DTCs stored in the system with KDS.
  7. Re-check DTC in the system with KDS.
  8. Did the same DTC is stored in the system?

    YES 

    • Carefully re-do this troubleshooting guide steps.
    • If no problems still occurs, replace MFC and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

About FixVault