FixVault
Home › Kia › 2019 › Sorento L › Repair and Diagnosis › External Pages › Different car › Section 140 (Body Control Module Diagnosis) › DTC B163C-00: LIN Channel3 Reception Error › Verification Of Repair

Verification Of Repair

WARNING: This page is about a different car, the 2020 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC output again?

    YES 

    • Go to applicable troubleshooting procedure.

    NO 

    • Problem is corrected and the system operation performs to specification at this time.
About FixVault