Repair Procedures: Removal
WARNING: This page is about a different car, the 2020 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
- Disconnect the accelerator position sensor connector (A).
- Remove the upper mounting cap (B), and then remove the mounting nut (C).
- Remove the lower mounting cap (D), and then remove the mounting nut (E).
 Courtesy of KIA MOTORS AMERICA, INC.
|
 Courtesy of KIA MOTORS AMERICA, INC.
|