FixVault
Home › Kia › 2019 › Soul Base, Automatic Trans › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Yaw-Rate And G-Sensor › Repair Procedures › G-Sensor Calibration

G-Sensor Calibration

NOTE: If the SRSCM is replaced always perform Lateral G Sensor Calibration.
  1. Ignition "OFF", connect KDS.
  2. Ignition "ON" & Engine "OFF" select vehicle name and ESC System.
  3. Perform G-Sensor Calibration.
  4. Perform the "G-Sensor Calibration" procedure with KDS.
  5. Complete the "G-Sensor Calibration" procedure.
About FixVault