FixVault
Home › Kia › 2019 › Soul Base, Automatic Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Knock Sensor (KS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  3. Disconnect the knock sensor connector (A).
    Fig 1: Locating Knock Sensor Connector
    G12227260Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the mounting bolt (A), and then remove the sensor (B) from the cylinder block.
    Fig 2: Locating Sensor And Mounting Bolt
    G12227261Courtesy of KIA MOTORS AMERICA, INC.
About FixVault