Spark Plug Inspection
- Remove spark plugs.
- Visually/physically inspect the following items:
- Damaged insulation, worn electrodes, oil or fuel fouled, loose terminals and cracks.
- Check for spark plug gap: 0.9 - 1.0 mm (0.035 - 0.039 in.)
- Check if the spark plug for the relevant cylinder is lighter in color than the other plugs.
- Have any problems been found?
YES
- Repair or replace as necessary and go to "Verification of Vehicle Repair " procedure.
NO
- Go to "Compression Pressure Inspection " procedure below.