Repair Procedures: Replacement
WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative (-) battery terminal.
- Remove the main crash pad assembly.
(Refer to Body - "MAIN CRASH PAD ASSEMBLY ")
- Remove the BCM (Body Control Module) cluster.
(Refer to Body Electrical System - "BODY CONTROL MODULE (BCM) ")
- Disconnect the connector (A) and then remove the mode control actuator (B) after loosening the mounting screws.
- To install, reverse the removal procedure.