FixVault

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning to work.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console.

    (Refer to "FLOOR CONSOLE ")

  5. Remove the rear heating joint duct (A).
    G12818363Courtesy of KIA MOTORS AMERICA, INC.
  6. Pull up the lock of the SRSCM connector and disconnect the connector (A).
    G12818364Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the SRSCM mounting bolts (3EA) from the SRSCM, and then remove the SRSCM.
    G12818365Courtesy of KIA MOTORS AMERICA, INC.