Component Replacement After Deployment
NOTE:
Before doing any SRS repairs, use the KDS to check for DTCs. Refer to the DTC INDEX
Diagnostic Trouble Code list for repairing of the related DTCs.
When the front airbag(s) deployed after a collision, replace the following items.
- SRSCM
- Deployed airbag(s)
- Seat belt pretensioner(s)
- Emergency fastening device
- Front impact sensors
- Inspect the clock spring for heat damage.
If any damage is found, replace the clock spring.
When the side/curtain airbag(s) deployed after a collision, replace the following items.
- SRSCM
- Deployed airbag(s)
- Side impact sensor(s) on the deployed side(s)
When the vehicle is completely repaired, verify that the SRS airbag system is OK.
- When the ignition switch is turned ON, the SRS indicator should come on for about 6 seconds before going off.