FixVault
Home › Kia › 2019 › Stinger Base, RWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Idle Stop & Go ISG System - 2.0L › ISG OFF Switch › Repair Procedures › Installation

Repair Procedures: Installation

  1. Install the console floor switch complete.
  2. Install the connector from the console floor switch complete.
  3. Connect the connectors from the console upper complete.
  4. Install the console upper complete.
  5. Connect the negative (-) battery terminal.
NOTE:
  • Make sure that the connectors are plugged in properly.
  • Check the AVM system for normal operation.
About FixVault