FixVault
Home › Kia › 2020 › Cadenza Technology › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis (5 Of 6) › DTC P061A-00: Internal Control Module Torque Performance › DTC Information › DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Level 2 monitoring (=Process monitoring)
  1. Poor Connector Connection
  2. Faulty ECM
Enable Conditions
  • Ignition "ON".
  • Engine speed during engine start is higher than 32RPM
Threshold Value
  • Actual value is higher or lower than allowable range (ADC monitoring or Engine speed ratio monitor or Idle speed controller monitor or torque loss monitor or Min/Max Clutch torque monitor or Pedal value monitor or TPS ratio monitor or Mass fuel flow monitor errors)
Diagnostic Time
  • 480ms
MIL ON Condition
  • 1 driving cycle
About FixVault