FixVault

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect the GDS and select the "Diagnostic Trouble Codes (DTC)" mode.
  2. Erase the DTCs and test the vehicle according to the DTC Setting Condition in DTC Information.
  3. Did the same DTC return?

    YES 

    • Go to the applicable Troubleshooting (DTC INDEX ) procedure.

    NO 

    • The system is running properly in line with the specifications at this time.