FixVault
Home › Kia › 2020 › Optima EX › Repair and Diagnosis › External Pages › Different car › Section 391 (Electronic Stability Control (ESC) System) › ESC Control Module › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
  2. After installation, bleed the brake system.

    (Refer to Brake system - "BRAKE BLEEDING PROCEDURES ")

  3. Conduct the Variant coding.
  4. Conduct the Auto Detected Sensor Calibration.
  5. Conduct the Longitudinal G Sensor Calibration.
  6. After replacing the ESP control module execute the "Assembly Check (ECU replacement)" of the additional function to check that the mounting is successful.
About FixVault