Repair Procedures: Removal
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal.
- Disconnect the accelerator position sensor (APS) connector (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Remove the accelerator pedal module (A) after loosening the mounting nuts.
Tightening torque
:
6.9 - 10.7 N.m (0.7 - 1.1 kgf.m, 5.0 - 7.9 lb.ft)
 Courtesy of KIA MOTORS AMERICA, INC.
|