Repair Procedures: Installation
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
- When installing, press and rotate the piston into the caliper body until it is fully retracted.NOTE:
- Wind the piston into the caliper body until it is fully retracted.
- Do not use any power assisted tools for this task.
- After installing, bleed the brake system.
(Refer to Brake System - "BRAKE SYSTEM BLEEDING ")
(Refer to Brake System - "ABS SYSTEM BLEEDING ")
(Refer to Brake System - "ESP SYSTEM BLEEDING ")