Repair Procedure: Removal
- Turn the ignition switch OFF.
- Disconnect the battery sensor connector (A) and battery negative (-) terminal.
Battery negative (-) terminal tightening nut :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
- Disconnect the battery.
(Refer to Engine Electrical System - "BATTERY ")
- Remove the battery sensor & battery negative (-) cable assembly after loosening the sensor cable mounting bolt (A).
Battery sensor & battery negative (-) cable assembly mounting bolt (Chassis ground) :
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 16.0 ~ 23.9 lb-ft)