Repair Procedures: Installation

WARNING: This page is about a different car, the 2019 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE:

Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.

Smear and cover splines (B) with molybdenum type high pressure grease.

GREASE SPL-1 or equivalent

Courtesy of KIA MOTORS AMERICA, INC.

Install the propeller shaft so that the runout markings (Transfer assembly 1 ea, propeller shaft 1 ea) are close to each other.

Courtesy of KIA MOTORS AMERICA, INC.