Rear Wheel Alignment: Camber
WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the nut holding the lower arm cam bolt (A).
- Adjust rear camber by turning the rear lower arm cam bolt (A) clockwise or counterclockwise. Camber adjustment should be made by turning the right and left cam bolt by the same amount.
Camber:
Wheel & Tire 18 in: -1.5° ± 0.5°
Wheel & Tire 19 in, High Suspension: -1.2° ± 0.5°
One scale turn: About 0.15°
Cam bolt (LH): Clockwise camber (+)
Cam bolt (RH): Clockwise camber (-)
- When completing the rear camber adjustment, tighten the nut to specified torque.
Tightening torque:
137.3 - 156.9 N.m (14.0 - 16.0 kgf.m, 101.3 - 115.7 lb.ft)