Repair Procedures: Removal
WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative terminal.CAUTION: After disconnecting the cables, wait at least 3 minutes.
- Remove the crash pad lower panel.
(Refer to " Replacement ")
- Remove the knee airbag module (A) by loosening the mounting nuts.
Tightening Torque: 0.7 ~ 1.1 kgf.m
- Disconnect the knee airbag connector (A) by pressing the lock pin.