Inspection Procedure

□ Inspect leak air or stuck

1. Inspect a contamination, gasket and installation.
   • Damaged or installation of throttle body
   • Damaged or installation of intake manifold and gasket which is installed in surge tank
   • Contamination and stuck in intake manifold
   • Contamination between surge tank and PCSV and stuck open
   • Damaged or contamination of O2S (up)
   • Visual check leak a catalyst and a exhaust system of O2S (down)

□ Inspect fuel line

1. Inspect a stuck, a contamination, a installation.
   • Check fuse line connection
   • Check a installation of line, poor or damaged
   • Damaged or cracked pipe
   • Inspect a contamination of fuel filter

   Good 

   • Go to "Wiring Inspection " procedure.

   No Good 

   • Repair as necessary and Go to "VERIFICATION OF REPAIR " procedure.